Pressure tank replacement in Licking County, OH
A tank that no longer holds its air charge makes the pump work harder and the pressure swing.
The pressure tank gives the system a cushion of stored water under pressure so the pump does not start every time a tap opens. When the tank loses its air charge or its internal bladder fails, the pump cycles on and off rapidly and pressure feels weak.
Not every cycling problem means a new tank. A tank can sometimes be recharged, and a failing pressure switch causes similar symptoms. Replacing a pressure tank with a like tank is covered by the repair definition in OAC 3701-28-01.
We diagnose before we quote. If the tank is the problem you will see why, and if it is the switch we will say so.
Signs of a tank problem
- Short-cycling: the pump clicks on and off every few seconds.
- Pressure that drops while a shower or appliance runs.
- Water at the tank air valve instead of air, a sign the bladder has failed.
- A tank that is wet or rusting on the outside.
- Pump runs a lot even when little water is being used.
Pressure Tank Replacement: questions, answered
Can a pressure tank just be recharged?
Sometimes. If the bladder is intact, restoring the air charge can fix it. If water comes out of the air valve, the bladder has failed and the tank needs replacing.
Is it the tank or the switch?
They look alike from the kitchen. A diagnosis separates them. See pressure switch repair.
Does a tank swap need a permit?
OAC 3701-28-01 lists storage or pressure tanks among the things whose servicing or replacement counts as a repair. Read the permit guide for the source.
Other services
Serving Pataskala, Johnstown, Granville, Heath and the rest of Newark, Ohio.
Get a written pressure tank estimate
Tell us what is happening and where you are in Newark, Ohio. We will reply with next steps.